LogoLTR 3-18 
  • Safety instructions
    • Hazard levels
    • General Machine Safety Warnings
    • Lawn trimmer and lawn edge trimmer safety warnings
    • Safe servicing and care
    • Safe transport and storage
    • Residual risks
    • Risk reduction
  • Intended use
    • Rechargeable battery packs and chargers
  • Environmental protection
  • Accessories and spare parts
  • Scope of delivery
  • Symbols on the device
  • Device description
  • Installation
    • Installing the string guard
  • Initial startup
    • Adjusting the handle and guide
    • Adjusting shaft length
    • Adjusting the string length
    • Installing the battery pack
  • Operation
    • Working techniques
    • Extending the string length during operation
    • Setting the cutting head tilt angle
    • Mowing under obstacles
    • Mowing edges
    • Removing the battery pack
    • Finishing operation
  • Transport
  • Storage
  • Care and maintenance
    • Cleaning the device
    • Replacing the cutting tool
      • Replacing the string reel
  • Troubleshooting guide
    • The device does not start up

    • The device does not start up

    • The device does not start up

    • The device stops during operation

    • The device stops during operation

    • The device stops during operation

    • The device stops during operation

    • The device stops during operation

  • Warranty
  • Technical data
  • Vibration value
    • Device with a hand-arm vibration value > 2.5 m/s² (see chapter Technical Data in the operating instructions)
  • Declaration of Conformity

      LTR 3-18 

      5.991-186.0 (10/26)

      Safety instructions

      Read these safety instructions, operating instructions, the safety instructions supplied with the battery pack, and the operating instructions supplied with the battery pack/charger before using the device for the first time. Proceed accordingly. Keep the booklets for future reference or for future owners.

      In addition to the notes in the operating instructions, you also need to take into consideration the general safety regulations and accident prevention guidelines applicable by law.

      Hazard levels

      DANGER

      Indication of an imminent threat of danger that will lead to severe injuries or death.

      WARNING

      Indication of a potentially dangerous situation that may lead to severe injuries or death.

      CAUTION

      Indication of a potentially dangerous situation that may lead to minor injuries.

      ATTENTION

      Indication of a potentially dangerous situation that may lead to damage to property.

      General Machine Safety Warnings

      WARNING

      Read all safety warnings, instructions, illustrations and specifications provided with this machine.

      Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

      The term "machine" in the warnings refers to your mains-operated (corded) machine or battery-operated (cordless) machine.

      1. Work area safety

        1. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

        2. Do not operate machines in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Machines create sparks which may ignite the dust or fumes.

        3. Keep children and bystanders away while operating a machine. Distractions can cause you to lose control.

      2. Electrical safety

        1. Machine plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) machines. Unmodified plugs and matching outlets will reduce the risk of electric shock.

        2. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

        3. Do not expose machines to rain or wet conditions. Water entering a machine will increase the risk of electric shock.

        4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the machine. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

        5. When operating a machine outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

        6. If operating a machine in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

      3. Personal safety

        1. Stay alert, watch what you are doing and use common sense when operating a machine. Do not use a machine while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating machines may result in serious personal injury.

        2. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.

        3. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the machine. Carrying machines with your finger on the switch or energising machines that have the switch on invites accidents.

        4. Remove any adjusting key or wrench before turning the machine on. A wrench or a key left attached to a rotating part of the machine may result in personal injury.

        5. Do not overreach. Keep proper footing and balance at all times. This enables better control of the machine in unexpected situations.

        6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

        7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

        8. Do not let familiarity gained from frequent use of machines allow you to become complacent and ignore machine safety principles. A careless action can cause severe injury with a fraction of a second.

      4. Machine use and care

        1. Do not force the machine. Use the correct machine for your application. The correct machine will do the job better and safer at the rate for which it was designed.

        2. Do not use the machine if the switch does not turn it on and off. Any machine that cannot be controlled with the switch is dangerous and must be repaired.

        3. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the machine before making any adjustments, changing accessories, or storing machines. Such preventive safety measures reduce the risk of starting the machine accidentally.

        4. Store idle machines out of the reach of children and do not allow persons unfamiliar with the machine or these instructions to operate the machine. Machines are dangerous in the hands of untrained users.

        5. Maintain machines and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the machine’s operation. If damaged, have the machine repaired before use. Many accidents are caused by poorly maintained machines.

        6. Keep cutting machines sharp and clean. Properly maintained cutting machines with sharp cutting edges are less likely to bind and are easier to control.

        7. Use the machine, accessories and machine bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the machine for operations different from those intended could result in a hazardous situation.

        8. Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the machine in unexpected situations.

      5. Battery machine use and care

        1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

        2. Use machines only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

        3. When battery pack is not in use, keep it away from other metal objects, like paperclips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

        4. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

        5. Do not use a battery pack or machine that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.

        6. Do not expose a battery pack or machine to fire or excessive temperature. Exposure to fire or temperature above 130 °C may cause explosion.

        7. Follow all charging instructions and do not charge the battery pack or machine outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

      6. Service

        1. Have your machine serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the machine is maintained.

        2. Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

      Lawn trimmer and lawn edge trimmer safety warnings

      1. Do not use the machine in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning.

      2. Thoroughly inspect the area for wildlife where the machine is to be used. Wildlife may be injured by the machine during operation.

      3. Thoroughly inspect the area where the machine is to be used and remove all stones, sticks, wires, bones, and other foreign objects. Thrown objects can cause personal injury.

      4. Before using the machine, always visually inspect to see that the cutter and the cutter assembly are not damaged. Damaged parts increase the risk of injury.

      5. Keep guards in place. Guards must be in working order and be properly mounted. A guard that is loose, damaged, or is not functioning correctly may result in personal injury.

      6. Keep all cooling air inlets clear of debris. Blocked air inlets and debris may result in overheating or risk of fire.

      7. Wear eye protection and ear protection. Adequate protective equipment will reduce personal injury.

      8. While operating the machine, always wear non-slip and protective footwear. Do not operate the machine when barefoot or wearing open sandals. This reduces the chance of injury to the feet from contact with the moving cutter.

      9. Always wear clothing such as trousers that covers the operator’s legs while operating the machine. Contact with the moving cutter or line may cause injury.

      10. Keep bystanders away while operating the machine. Thrown debris can result in serious personal injury.

      11. Do not operate the machine above waist height. This helps prevent unintended cutter contact and enables better control of the machine in unexpected situations.

      12. Exercise caution when operation the machine in wet grass. Walk, never run. This reduces the risk of slipping and falling which may result in personal injury.

      13. Do not operate the machine on excessively steep slopes. This reduces the risk of loss of control, slipping and falling which may result in personal injury.

      14. When working on slopes, always be sure of your footing, always work across the face of slopes, never up or down and exercise extreme caution when changing direction. This reduces the risk of loss of control, slipping and falling which may result in personal injury.

      15. Keep all power cords and cables away from cutting area. Power cords or cables may be hidden in hedges or bushes and can be accidentally cut or damaged by the line or cutter.

      16. Keep all parts of the body away from the moving trimmer cutter or line. Do not clear material from the machine until it has been disconnected from the power source. The moving trimmer cutter or line may result in serious personal injury.

      17. Carry the machine with the machine switched off and away from your body. Proper handling of a machine will reduce the likelihood of accidental contact with a moving line or cutter.

      18. Only use replacement cutting heads and trimmer cutters or lines specified by the manufacturer. Do not replace the trimmer cutters or lines with metal wires or blades. Incorrect replacement parts may cause loss of control, breakage and injury.

      Safe servicing and care

      WARNING

      After pushing out a new string, bring the device into the normal operating position before switching it on.

      WARNING

      Ensure that the device is in a safe condition by regularly checking that all bolts, nuts and screws are screwed tight.

      WARNING

      Check that the moving parts function correctly and are not blocked, and that no parts are broken or damaged. Have a damaged device repaired before using it.

      WARNING

      Switch the motor off, remove the battery pack and make sure that all moving parts have stopped moving:

      • Before cleaning or servicing the device.

      • Before changing accessories.

      CAUTION

      Only use accessories and spare parts which are approved by the manufacturer. Only original accessories and original spare parts ensure that the appliance will run fault-free and safely.

      ATTENTION

      Clean the product with a soft, dry cloth each time after use.

      Note

      Service and maintenance work may only be performed by suitably qualified and specially trained personnel. We recommend sending the product to an authorised service centre for repair.

      Note

      You may only perform the adjustments and repairs described in these operating instructions. Contact your authorised Customer Service department for other repairs.

      Note

      Have damaged or illegible warning signs on the device replaced by the authorised Customer Service department.

      Safe transport and storage

      WARNING

      Switch the device off, allow it to cool down and remove the battery pack before storage or transportation.

      CAUTION

      Risk of injury and damage to the device. Secure the device against movement or falling down during transport.

      ATTENTION

      Remove all foreign bodies from the device before storage or transportation.

      ATTENTION

      Store the device in a dry, well ventilated location out of the reach of children. Keep the device away from corrosive substances such as garden chemicals.

      ATTENTION

      Do not store the device outdoors.

      Residual risks

      WARNING

      Certain residual risks remain present, even when the device is operated in the prescribed manner. The following dangers can be present when using the device:

      • Vibration can cause injuries. Use the correct tools for the job, use the handles provided and restrict the working time and hazard exposure time.

      • Noise can cause hearing injuries. Wear hearing protection and limit the duration of exposure.

      • Injuries due to flung objects.

      Risk reduction

      CAUTION

      Using the device for longer periods can cause poor circulation in the hands due to vibrations. A general period of use cannot be set, because this depends on several influencing factors:

      • Personal tendency to suffer from poor circulation (frequently cold fingers, tingling sensation in the fingers)

      • Low ambient temperature. Wear warm gloves to protect your hands.

      • Holding the device too tightly hindering blood circulation.

      • Continuous operation is more harmful than operation interrupted by work breaks.

      You should see a doctor if using the device regularly and for lengthy periods of time, and in the event of repeated occurrences of symptoms such as tingling in the fingers or cold fingers.

      Intended use

      This device is suitable for cutting grass or similar soft vegetation.

      DANGER

      Improper use

      Risk of fatal injury from incision injuries

      Only use the device for its proper use.Never use metal blades such as saw blades or brush blades.

      WARNING

      Flying objects

      Risk of injury and damage

      Maintain a minimum distance of 15 m from persons, animals and other objects.
      • The device is intended for outdoor use.

      • The device can be used for trimming grass along walls, fences, trees and on edgings.

      • The device can also be used for mowing in places that are difficult to access with lawnmowers, e.g.ditches, slopes and clearings.

      • Modifications and changes not authorised by the manufacturer are prohibited.

      • Never use the device in a wet environment or in the rain.

      • Never mow wet grass or other growth.

      Rechargeable battery packs and chargers

      Only use the device with battery packs and chargers from the KÄRCHER 18 V Battery Power (+) system.

      Suitable battery packs and chargers are marked with the KÄRCHER 18 V Battery Power (+) System symbol.
      Suitable battery packs bear the designation "Battery Power 18/... and Battery Power+ 18/...".
      Suitable chargers bear the designation "BC 18 V ...".

      Environmental protection

      The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.

      Electrical and electronic devices contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which - if handled or disposed of incorrectly - can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the device. Devices marked by this symbol are not allowed to be disposed of together with the household rubbish.

      Notes on the content materials (REACH)

      Current information on content materials can be found at: www.karcher.de/REACH

      Accessories and spare parts

      Only use original accessories and original spare parts; they ensure safe and fault-free operation of the device.

      Information on accessories and spare parts can be found at www.karcher.com.

      Scope of delivery

      The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

      Symbols on the device

      Follow all warning notices and safety instructions. Read and comprehend all instructions before using the product.
      Wear suitable hearing protection when working with the device.
      Wear suitable eye protection when working with the device.
      Do not subject the device to rain or moist conditions.
      Danger due to flung objects.
      Keep a safe distance away.
      Remove the battery pack before carrying out any maintenance work.

      Device description


      1. Swivel head unlocking button
      2. Trigger lockout button
      3. Handle
      4. Battery pack unlocking button
      5. Handle and guide
      6. Unlocking button for handle and guide
      7. Type plate
      8. Battery pack mount
      9. Reel cover
      10. String reel
      11. Trimmer string
      12. Feed-through hole for trimmer string
      13. String guard
      14. String reel housing
      15. Cutting blade for string length
      16. Unlocking button for tilt angle adjustment
      17. Plant guard bracket
      18. Shaft
      19. Quick-release shaft
      20. Trigger
      21. *Trimmer blade
      22. *Battery Pack Battery Power 18V
      23. *Quick Charger Battery Power 18 V

      * optional

      Installation

      Installing the string guard

      WARNING

      Blade on the string guard

      Incision injuries

      Install the string guard before using the device for the first time.

      WARNING

      Exposed string

      Incision injuries

      Never use the device without the string guard.

      The string guard must face the operator.

      1. Insert the string guard into the bracket.

      Initial startup

      Adjusting the handle and guide

      1. Press the unlocking button for the handle and guide.

      2. Move the handle and guide to the desired position.


      3. Release the unlocking button for the handle and guide.

      Adjusting shaft length

      1. Open the quick-release shaft.


      2. Pull out the lower shaft to the desired length.

      3. Close the quick-release shaft.

      Adjusting the string length

      1. Press the button for releasing the string and pull the string out of the string reel and up to the cutting edge. If necessary, press the button several times.


      Installing the battery pack

      1. Push the battery pack into the mounting in the device until it audibly latches into place.


      Operation

      Working techniques

      CAUTION

      Obstacles in the mowing area

      Risk of injury and damage

      Before starting mowing, check the work area for objects that may be flung away, e.g. wires, stones, cords or glass.
      1. Fold out the plant guard bracket.

      2. Pull the unlocking button.


      3. Actuate the power switch.

        The device starts up.

        Note

        The unlocking button does not need to be held during operation.

      4. Guide the cutting head parallel to the ground.

      5. Guide the device in a semi-circular movement over the cutting area.

      6. Mow long grass in several passes.

      Extending the string length during operation

      The string on the device wears during mowing and becomes shorter due to fraying and being torn off. A string that is too short will result in unsatisfactory mowing results.

      Note

      The string length can be extended during operation.

      1. Release the trigger.


      2. Pull the unlocking button and press the trigger.

        The string extends automatically and is automatically trimmed to the correct length by the cutting blade.

      Note

      You must replace the string reel if the string no longer extends automatically (see Chapter Replacing the string reel).

      Note

      If the string is not extended to the blade, repeat the process several times if necessary.

      Setting the cutting head tilt angle

      1. Remove the battery pack (see chapter Removing the battery pack).

      2. Press and hold the tilt adjustment unlocking button with your foot.


      3. Move the shaft to the desired position.

      4. Release the swivel head unlocking button.

      5. Mount the battery pack (see Chapter Installing the battery pack).

      Mowing under obstacles

      1. Move the shaft to the centre position (see chapter Setting the cutting head tilt angle).

      2. Pull the trigger unlocking button and press the trigger.

      3. Mow under the obstacle.

      Mowing edges

      1. Remove the battery pack (see chapter Removing the battery pack).

      2. Move the shaft to the centre position (see chapter Setting the cutting head tilt angle).

      3. Press the shaft unlocking button towards the swivel head and hold it. Turn the shaft through 180°.


      4. Release the shaft unlocking button.

      5. Mount the battery pack (see Chapter Installing the battery pack).

      6. Pull the trigger unlocking button and press the trigger.

      7. Mow the edge regions.


      Removing the battery pack

      Note

      During longer work breaks, remove the battery pack from the device and secure it against unauthorised use.

      1. Press the battery pack unlocking button to unlock the battery pack.


      2. Remove the battery pack from the device.

      Finishing operation

      1. Remove the battery pack from the device (see Chapter Removing the battery pack).

      2. Clean the device (see Chapter Cleaning the device).

      Transport

      CAUTION

      Failure to observe the weight

      Risk of injury and damage

      Be aware of the weight of the device during transportation.
      1. Remove the battery packs (see Chapter Removing the battery pack).

      2. Secure the device against slipping and tipping over when transporting in vehicles.

      Storage

      WARNING

      Switch the device off, allow it to cool down and remove the battery pack before storage or transportation.

      Always clean the device before putting it into storage (see Chapter Cleaning the device).

      1. Store the device in a dry, well ventilated location. Keep away from corrosive substances such as garden chemicals and defrosting salt. Do not store the device outdoors.

      Care and maintenance

      CAUTION

      Uncontrolled startup

      Cutting injuries

      Remove the battery packs from the device before all work on the device.

      CAUTION

      Risk of injury from sharp blades

      Wear safety goggles and protective gloves when working on the device.

      Cleaning the device

      1. Remove any remaining cutting residue from the string guard and the cutting head.

      2. Clean the device components with a damp cloth if required.

      3. Clean the front and rear battery pack mount and electric contacts of dirt and foreign bodies regularly.

      Replacing the cutting tool

      Replacing the string reel

      1. Press the string reel cover unlocking mechanism and remove the string reel cover.


      2. Remove and dispose of the string reel.

      3. Feed the end of the string on the new string reel through the eye.


      4. Fit the string reel in the support.

      5. Fit the string reel cover in the support. Take care to ensure that the string reel cover audibly latches into place.


      6. Adjust the string length (see Chapter Adjusting the string length).

      Troubleshooting guide

      Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.

      As the battery pack ages, even if it is looked after, its capacity reduces such that the full run time will no longer be reached when fully charged. This does not indicate a defect.

      • The device does not start up 

      • The device does not start up 

      • The device does not start up 

      • The device stops during operation 

      • The device stops during operation 

      • The device stops during operation 

      • The device stops during operation 

      • The device stops during operation 

      The device does not start up

      Cause:

      Battery pack is not inserted correctly.

      Remedy:

      • Push the battery pack into the mounting until it latches into place.

      The device does not start up

      Cause:

      Battery pack is empty

      Remedy:

      • Charge the battery pack.

      The device does not start up

      Cause:

      Battery pack is defective.

      Remedy:

      • Replace the battery pack.

      The device stops during operation

      Cause:

      String is too long and is causing the motor to overload

      Remedy:

      • Install the string guard.

        The string will automatically be shortened.

      The device stops during operation

      Cause:

      Cutting head blocked by cutting residue

      Remedy:

      • Remove the cutting residue.

        If necessary, remove the string guard to enable more thorough cleaning.

      The device stops during operation

      Cause:

      Motor is overloaded

      Remedy:

      • Mow only suitable cutting material, see Chapter Intended use.

      The device stops during operation

      Cause:

      Motor has overheated

      Remedy:

      • Stop working and allow the motor to cool down.

      The device stops during operation

      Cause:

      The battery has overheated

      Remedy:

      • Stop working and allow the battery to cool down to normal battery temperature.

      Warranty

      The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing flaw is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorised customer service site.

      You can find more detailed information at: www.karcher.com/dealersearch

      Further warranty information (if available) can be found in the service area of your local KÄRCHER website under "Downloads".

      Technical data

        

      Device performance data
      Operating voltage
      18 V
      Working Width
      300 mm
      Cutting string, diameter
      1,6 mm
      Max. speed (± 100)
      8500 /min
      Determined values in acc. with EN 60335-2-79
      Front handle hand-arm vibration value ahv with line spool
      1 m/s2
      Rear handle hand-arm vibration value ahv with line spool
      0,6 m/s2
      Front handle hand-arm vibration value ahv with blade
      9,2 m/s2
      Rear handle hand-arm vibration value ahv with blade
      7,8 m/s2
      Uncertainty hand-arm vibration K
      1,5 m/s2
      Front handle repeated shock vibrations pF with line spool
      12 m/s2
      Front handle uncertainty repeated shock vibration K with line spool
      1,5 m/s2
      Rear handle repeated shock vibrations pF with line spool
      12 m/s2
      Rear handle uncertainty repeated shock vibration K with line spool
      1,5 m/s2
      Front handle repeated shock vibrations pF with blade
      131 m/s2
      Front handle uncertainty repeated shock vibration K with blade
      16 m/s2
      Rear handle repeated shock vibrations pF with blade
      130 m/s2
      Rear handle uncertainty repeated shock vibration K with blade
      5 m/s2
      Sound power level LwA
      92 dB(A)
      Guaranteed sound power level LWA,d
      95 dB(A)
      Dimensions and weights
      Length x width x height
      1015 x 317 x 1000 mm
      Weight (without battery pack)
      2,13 kg

      Vibration value

      WARNING

      The specified vibration value was measured using a standard test procedure and may be used to compare devices.

      The specified vibration value may be used in a provisional assessment of the load.

      Depending on the way the device is used, the vibration emission can deviate from the specified overall value during the current use of the device.

      Device with a hand-arm vibration value > 2.5 m/s² (see chapter Technical Data in the operating instructions)

      CAUTION

      Uninterrupted use of the device for several hours can lead to numbness.

      CAUTION

      Wear warm gloves to protect your hands.

      CAUTION

      Take regular breaks from work.

      Declaration of Conformity

      EU Declaration of Conformity

      We hereby declare that the product named below complies with the relevant provisions of the directives and regulations listed. This declaration is invalidated by any changes made to the product that are not approved by us. The manufacturer shall bear sole responsibility for issuing of this declaration of conformity.

      Product: Battery-powered string trimmer/edge trimmer

      Type: 1.445-xxx.0

      LTR 2-18,
      LTR 3-18

      Directives and Regulations

      2000/14/EC (+2005/88/EC)

      2006/42/EC (+2009/127/EC) (until 19/01/2027) (EU) 2023/1230 (from 20/01/2027)

      2011/65/EU

      2014/30/EU

      Harmonised standards used

      EN 60335‑1:2012+A11:2014+A13:2017+ A1:2019+A14:2019+A2:2019+A15:2021

      EN 50636-2-91:2014

      EN 55014-1: 2017 + A11: 2020

      EN 55014-2: 1997+A1: 2001+A2: 2008

      EN 62233: 2008

      EN IEC 63000: 2018

      Conformity evaluation procedure used

      2000/14/EC and amended by 2005/88/EC: Annex VI

      Name and address of the notified body involved

      TÜV Rheinland LGA Products GmbH (NB 0197)

      Tillystraße 2

      D-90431 Nuremberg

      Germany

      Sound power level dB(A)

      LTR 2-18

      Measured: 90

      Guaranteed: 93

      LTR 3-18

      Measured: 92

      Guaranteed: 95

      Name and address

      Documentation supervisor:

      S. Reiser

      Alfred Kärcher SE & Co. KG

      Alfred-Kärcher-Str. 28 - 40

      71364 Winnenden (Germany)

      Tel.: +49 7195 14-0

      Fax: +49 7195 14-2212


      Winnenden, 2026/06/01

      The undersigned act on behalf of and with the authority of the Board of Directors.

      Alfred Kärcher SE & Co. KG

      Alfred-Kärcher-Str. 28 - 40

      71364 Winnenden (Germany)

      Ph.: +49 7195 14-0

      Fax: +49 7195 14-2212

      UK Declaration of Conformity

      We hereby declare that the product named below complies with the relevant provisions of the directives and regulations listed. This declaration is invalidated by any changes made to the product that are not approved by us. The manufacturer shall bear sole responsibility for issuing of this declaration of conformity.

      Product: Battery-powered string trimmer/edge trimmer

      Type: 1.445-xxx.0

      LTR 2-18,
      LTR 3-18

      Directives and Regulations

      S.I. 2001/1701 (as amended)

      S.I. 2008/1597 (as amended)

      S.I. 2012/3032 (as amended)

      S.I. 2016/1091 (as amended)

      Designated standards used

      EN 60335‑1:2012+A11:2014+A13:2017+ A1:2019+A14:2019+A2:2019+A15:2021

      EN 50636-2-91:2014

      EN 55014-1: 2017 + A11: 2020

      EN 55014-2: 1997+A1: 2001+A2: 2008

      EN 62233: 2008

      EN IEC 63000: 2018

      Applied conformity assessment procedure

      S.I. 2001/1701 (as amended): Schedule 9

      Name and address of the approved body involved

      TÜV Rheinland LGA Products GmbH (NB 0197)

      Tillystraße 2

      D-90431 Nuremberg

      Germany

      Sound power level dB(A)

      LTR 2-18

      Measured: 90

      Guaranteed: 93

      LTR 3-18

      Measured: 92

      Guaranteed: 95

      Name and address

      Documentation supervisor:

      S. Reiser

      Alfred Kärcher SE & Co. KG

      Alfred-Kärcher-Str. 28 - 40

      71364 Winnenden (Germany)

      Tel.: +49 7195 14-0

      Fax: +49 7195 14-2212


      Winnenden, 2026/06/01

      The undersigned act on behalf of and with the authority of the Board of Directors.

      Alfred Kärcher SE & Co. KG

      Alfred-Kärcher-Str. 28 - 40

      71364 Winnenden (Germany)

      Ph.: +49 7195 14-0

      Fax: +49 7195 14-2212

      <BackPage>


      2-2-SC-A5-GS-AW12579



      </BackPage>